<em id="f3lpv"></em>

            <pre id="f3lpv"></pre>
            <ins id="f3lpv"><dfn id="f3lpv"></dfn></ins>
            <track id="f3lpv"><ins id="f3lpv"><thead id="f3lpv"></thead></ins></track>
            聯系方式
            • 17753532320
            • 0535-3977838
            當前位置 :

            Maintenance of gun head crushing hammer

            點擊次數:   更新時間:19/04/28 14:06:04     煙臺華拓工程機械有限公司
            Gun head crushing hammer, also known as crushing hammer, broken stone, crushing, is one of the accessories often used by excavators, often used to open mountains, broken roads, houses, Bridges, mines and other working conditions of breaking stones. Gun head broken hammer was based on the hydrostatic pressure of the power, hydraulic drive piston run up, compressed nitrogen at the same time, when the piston to the reversing valves, hydraulic direction change makes the piston down, at the same time, influenced by nitrogen and piston weight force, so that the piston high-speed impact drill rod, the reciprocating motion of broken rock, concrete and other solid operations. In the use of the gun must be clear about the use of the hammer, so as not to cause unnecessary damage, the following with small make up together to understand it!

            For the maintenance of gun head crushing hammer, it is necessary to lubricate the lubricating point of the working device, replace the hydraulic oil in time, and inject new oil after cleaning the oil tank and oil filter. In addition, the main body of the gun head crushing hammer is a set of precision components containing hydraulic circulation system. Generally, the factory without special equipment should not decompose by itself, and it should be commissioned for maintenance. The professional team will have a better understanding of the structure of the gun head crushing hammer.

            The above is about the gun head crushing hammer maintenance attention to the content of the introduction, whether you; Got it? If you want to know more about the gun head crushing hammer information, welcome to pay attention to our website, in addition, you have this aspect needs, you are welcome to our company to choose and buy, call to consult at any time, we will provide you with good quality products and sincere service, look forward to cooperating with you!

            Small make up: xyq

            上一條:沒有了
            下一條:沒有了
            致力于打造力韓破碎錘、“YIHENG”品牌產品

            Committed to build Li Han broken hammer, "YIHENG" brand products.

            聯系我們
            • 聯 系 人:于希光 13468455385

              公司地址:煙臺市開發區北京南路8號東方工業園B區13號

            • 公司電話:17753532320

              公司傳真:0535-3977838

            推荐一个看B的微信公众号